IC693CPU360 | GE Fanuc PLC Series 90-30 | Grandly Automation Ltd

IC693CBL300
I/O bus expansion cables GE Fanuc 90-30 IC693CBL300 GE called “Wye cables,” are used to extend the I/O bus to expansion or remote baseplates in a Series...

IC693CBL303
The Hand-Hand Programmer and Converter cable GE Fanuc 90-30 IC693CBL303 provides the connections that allow the Hand-Held Programmer and the Programmable...

IC693CBL311 The I/O Interface Cable GE Fanuc 90-30 IC693CBL311 assembly consists of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector....
IC693CBL316 The GE Fanuc 90-30 IC693CBL316 cable is a 3-feet (1 meter) long, shielded cable with a 9-pin D-shell connector one one end and a 6-pin RJ-11 connector on the...
IC693CBL324
GE Fanuc 90-30 IC693CBL324 is a 3’ (1 meter) cable. GE Fanuc 90-30 IC693CBL324 provides connections between a DSM module and either a servos axis...

IC693CBL325 GE Fanuc 90-30 IC693CBL325 is a 10’ (3 meter) cable. GE Fanuc 90-30 IC693CBL325 connects between a DSM module and either a servo axis terminal block or an aux...
IC693CHS391 A modular CPU baseplate GE Fanuc 90-30 IC693CHS391 has 10 slots. GE Fanuc 90-30 IC693CHS391 cannot stand alone and must be connected to a system that...
IC693CHS392 GE Fanuc 90-30 IC693CHS392 is a 10 slot expansion base plate. Unable to stand alone the GE Fanuc 90-30 IC693CHS392 must be connected to a system that...
IC693CHS393 GE Fanuc 90-30 IC693CHS393 is a remote base plate. GE Fanuc 90-30 IC693CHS393 is unable to stand alone and must be connected to a system that already...
IC693CHS397 The GE Fanuc 90-30 IC693CHS397 is a 5 slot modular CPU base. GE Fanuc 90-30 IC693CHS397 is unable to stand alone and must be connected to a system with a CPU....
IC693CHS398
system with a CPU. GE Fanuc 90-30 IC693CHS398 is a 5 slot Expansion baseplate. GE Fanuc 90-30 IC693CHS398 has a 25-pin female D-type I/O Bus Expansion...

IC693CHS399 GE Fanuc 90-30 IC693CHS399 is a 5 slot remote base plate. GE Fanuc 90-30 IC693CHS399 cannot stand alone and must be connected to a system with a CPU. GE...
IC693CMM301 GE Fanuc 90-30 IC693CMM301 provides global communications on a Genius Communications bus between Series 90-30 PLCs and/or other GE Fanuc PLCs. The...
IC693CMM302 The Enhanced Genius Communications Module GE Fanuc 90-30 IC693CMM302 is an intelligent module. GE Fanuc 90-30 IC693CMM302 provides automatic global data...
IC693CMM311 The Communications Coprocessor Module, GE Fanuc 90-30 IC693CMM311 provides a high performance coprocessor for all Series 90-30 modular CPUs. GE Fanuc 90-30...
IC693CPU311 In the GE Fanuc 90-30 IC693CPU311 the CPU has user programabale memory of 6k(bytes) with 1k of register memory. GE Fanuc 90-30 IC693CPU311 is an embedded CPU...
IC693CPU313 GE Fanuc 90-30 IC693CPU313 has user programabale memory of 12k(bytes) with 2k of register memory. In the GE Fanuc 90-30 IC693CPU313 the CPU and memory...
IC693CPU323 The GE Fanuc 90-30 IC693CPU323 is not modular and cannot be changed. GE Fanuc 90-30 IC693CPU323 has user programabale memory of 12k(bytes) with 2k of register...
IC693CPU331 The GE Fanuc 90-30 IC693CPU331 is a single slot CPU that has user programabale memory of 16k(bytes) with 4k of register memory. Has 1 built in port the...
IC693CPU340 The GE Fanuc 90-30 IC693CPU340 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory. With 1 built in port...
IC693CPU341 The GE Fanuc 90-30 IC693CPU341 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory. With 1 built in port...
IC693CPU350 With 1 built in port the GE Fanuc 90-30 IC693CPU340 supports SNP/SNP-X master CCM, or RTU slave support and is a PCM module for RTU master support. The GE...
IC693CPU351 The GE Fanuc 90-30 IC693CPU351 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ, %AI)...
IC693CPU352 The GE Fanuc 90-30 IC693CPU352 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ,...
IC693CPU360 A GE Fanuc 90-30 IC693CPU360 has a processor speed of 25 megahertz. The GE Fanuc 90-30 IC693CPU360 is a single slot CPU that has user programabale...
IC693CPU363 The GE Fanuc 90-30 IC693CPU363 is a single slot CPU that is a PCM module for RTU master support. With 3 built in port the GE Fanuc 90-30 IC693CPU363...
IC693CPU364 The GE Fanuc 90-30 IC693CPU364 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ,...
IC693CPU374
The GE Fanuc 90-30 IC693CPU374/IC693CPU374 Plus is a single slot CPU that has a processor speed of 133 MHz and has user memory of 240KB (Note:...

IC693DSM302 The Motion Mate GE Fanuc 90-30 IC693DSM302 is a high-performance, 2-axis motion control module. The GE Fanuc 90-30 IC693DSM302 is highly integrated with the...
IC693DSM314
The Motion Mate GE Fanuc 90-30 IC693DSM314 is a high-performance motion control module. GE Fanuc 90-30 IC693DSM314 is highly integrated with the logic...

IC693LBR301 90-30 Documentation Library (paper manuals covering most options)
IC693MAR590 The 120 volt AC Input/Relay Output module GE Fanuc 90-30 IC693MAR590 provides 8 input points with one common power input terminal, and 8 normally-open relay...
IC693MCM001 GE Fanuc 90-30 IC693MCM001 is a Digital Servo Interface Module. The GE Fanuc 90-30 IC693MCM001 has a weight of 3 lbs. The GE Fanuc 90-30 IC693MCM001 is an...

IC693CPU360 | GE Fanuc PLC Series 90-30 | Grandly Automation Ltd